Article 4. Mechanical Code
4-401 International mechanical code incorporated.
There is hereby incorporated by reference, for the purpose of establishing regulations and rules applicable to the design, construction, quality of materials, erection, installation, alteration, repair, location, relocation, replacement, addition to, use or maintenance of heating, ventilating, cooling, refrigeration systems, incinerators, or other heat producing appliances, and all related subjects and matters as specified in such Code, the International Mechanical Code, 2018 Edition, as published by the International Code Council, such Code being made a part of the Ordinances and Code of the City of Hoisington as if fully set out herein, all as authorized by K.S.A. 12-3009 through 12-3012. Three copies of such Code shall be marked “Official Copy as Adopted by Ordinance No. 1563 of the City of Hoisington” to which shall be attached a copy of said ordinance and filed with the city clerk to be open to inspection and available to the public at all reasonable hours. Any person violating any provisions of such Code shall be punished as provided in Section 1-116 of the Code of the City of Hoisington.
(Code 2006; Ord. 1563)
4-402 Gas fitters; license required.
All gas fitting work for the installation, connection, extension, alteration or replacement of gas piping and fittings, or the repairing of gas piping and fittings, and any kind of gas piping extensions or alterations or old or used installations for the supply and use of natural and artificial gas in all buildings in the city shall be done only by a person, corporation, firm or institution licensed as a gas fitter by the city: provided, that a master plumber may be licensed to do gas fitting work as may be provided by law.
(Code 1985)
4-403 Same; bond.
(Reserved)
4-404 Same; insurance.
(Ord. 1072, Sec. 4; Code 2006)
4-405 Permit required; exceptions.
No gas fitter or plumber or other person shall install a gas conversion burner, floor furnace, central heating plant, or gas engine, or make alterations or install house gas piping in any building or structure without first obtaining a permit to do such work from the city clerk. Permits will not be required for setting or connecting other gas appliances where such connections are made to existing outlets previously installed by a licensed plumber or gas fitter.
(Code 1962, 5-702; Code 1985)
4-406 Same; application.
Any person desiring to perform any work relating to gas piping or fitting in a building for gas or to replace, alter or extend any such gas piping or to place any fixtures to be used in connection therewith shall file an application at the office of the city clerk, giving the correct location, the name and address of the owner of such building and a full and complete statement or description of the work proposed to be done. The permit shall describe and authorize the work approved to be done under the application and the same shall be displayed at the authorized place of work until the same has been finally inspected and approved. Upon the approval of the application by the plumbing inspector, a permit shall be issued upon the payment of the required fee.
(Code 1962, 5-702; Code 1985)
4-407 Same; fees; number of inspections.
All permits for gas plumbing work shall be issued upon payment of a fee of $75.00 to the city clerk, which fee shall include the cost of one inspection by the city. Additional inspections as may be required shall require the payment of an additional fee at the rate of $75.00 for each such inspection. All such inspections shall be reported to the city clerk by the inspector and the same shall be paid by the permit holder to the city clerk before any certificate of approval shall be issued by the inspector. After regular city employee working hours or on holidays or other non-working days, any requested inspection shall be made for a fee for its actual cost for the inspector’s time.
(Code 1962, 5-703; Ord. 1008, Sec. 12; 2015 fee schedule; Res. 16-2025)
4-408 Plumbing inspector; powers and duties.
(Code 1962, 5-706)
4-409 Inspection required.
(Code 1962, 5-704; Code 2006)
4-410 Same; notice to inspector.
It shall be the duty of any party installing or altering gas piping in any building in the city to notify the building inspector when the work is ready for inspection, and the whole system of gas piping shall be properly arranged for the inspector to test the same.
(Code 1985)
4-411 Same; unsatisfactory work.
If, upon inspection and test, the installation of any gas piping, or any part thereof, shall be found to not comply with the requirements of this article, the same shall be changed, rearranged, repaired or removed and gas shall not be permitted to flow through any piping until the same has been inspected and approved by the inspector.
(Code 1985)
4-412 Same; piping defects; notices; orders.
Where the requirements of this article have not been complied with, the inspector shall at once notify the owner or agent of the building in which the work has been done and the party installing such work and shall order such defects as found to be changed, rearranged or removed within a reasonable time.
(Code 1985)
4-413 Same; certificate of approval.
The inspector shall issue a certificate of approval at the completion of the work for which a specific permit has been issued, if after inspection it is found that such work complies with the provisions of this article and all other requirements of law or ordinance applicable thereto. A duplicate of each piping certificate shall be delivered to the party obtaining the permit and shall be authority for the gas utility to grant gas service.
(Code 1962, 5-704; Code 1985)
4-414 General penalty applied: successive violations.
(Code 1985)